Grouting & Bedding

REC EPO GROUT 21

REC EPO GROUT 21 is a high-strength epoxy grout designed for grouting machine and equipment bases. Ideal for deep placements and complex configurations, it offers excellent chemical resistance, strong bond, and superior load-bearing performance for long-lasting results. Meets API Standard 610, Appendix L, for Baseplate and Soleplate Grouting.

TDS

REC GROUT EP 23

A three component pourable epoxy grout based on a high grade epoxy resin and specially graded aggregates. On mixing a flowable grout is produced for use in heavy engineering and difficult conditions. Various grades are available to suite different requirements.

TDS

REC GROUT EPO 23

REC GROUT EPO 23 is a high-strength, three-component epoxy grout (resin, hardener, graded fillers) for grouting and anchoring pile caps. It is moisture-tolerant and castable, with excellent bond strength, dimensional stability, and chemical resistance, and stays workable and cures reliably in hot, tropical climates.

TDS

REC GROUT 115

REC GROUT 115 is a pumpable, non-shrink, high-strength grout that provides excellent corrosion protection for steel cables, anchorages, and rods. Highly fluid before curing, it hardens to a concrete-like finish and meets PTI thixotropic specifications. Also suitable for repairing previously grouted cables.

TDS

REC CABLE GROUT 715

REC CABLE GROUT 715 is a pumpable, non-shrink, high-strength grout that provides excellent corrosion protection for steel cables, anchorages, and rods. It is highly fluid, cures to a concrete-like appearance, meets PTI thixotropic specifications, and is also suitable for repairing previously grouted cables.

TDS

REC GROUT 721

REC GROUT 721 is a low-viscosity acrylic resin grout for dam repairs, sewer and storm pipe systems, pre-excavation grouting, strata control, and soil permeation. It offers adjustable set times and water-to-resin ratios, curing into a flexible, cross-linked gel with strong adhesion and lasting swelling properties, even after extended dry periods.

TDS

REC EPO INJECTION 52

REC EPO INJECTION 52 is a low-viscosity, high-modulus structural epoxy adhesive for repairing fine to medium cracks via gravity-feed application. Suitable for interior and exterior slabs between 10°C–35°C, it offers excellent bonding and sealing, and can also serve as an epoxy mortar for spall repair when mixed with aggregate.

TDS

REC EPO INJECTION 54

REC EPO INJECTION 54 is a solvent-free epoxy injection grout with a low-viscosity liquid hardener. It can be applied by free-flow gravity or mechanical/hand pump injection, effectively grouting gaps ranging from 0.1mm to 10mm.

TDS

REC GROUT 730

REC GROUT 730 is a ready-to-use, cementitious, shrinkage-compensating grout used for filling tie-rod holes, repairing damaged concrete, jacketing slabs, columns, beams, and footings, and fixing, joining, or closing concrete and precast elements.

TDS

REC GROUT 731

REC GROUT 731 is a ready-to-use, cementitious, shrinkage-compensating grout made from selected aggregates, special cement, and additives, formulated for applications requiring non-shrink properties.

TDS

REC GROUT 732

REC GROUT 732 is a ready-to-use, cementitious, shrinkage-compensating grout made from selected aggregates, special cement, and additives, formulated for high compressive strength with excellent adhesion and resistance to shock and vibration.

TDS

REC GROUT 733

REC GROUT 733 is a ready-to-use, cementitious, shrinkage-compensating grout made from selected aggregates, special cement, and additives, formulated for high compressive strength with excellent adhesion and resistance to shock and vibration.

TDS

REC GROUT 734

REC GROUT 734 is a non-metallic, non-shrink, non-gas-forming grout blended from Portland cement, special admixtures, and proprietary aggregates, offering high flexural and compressive strength in both plastic and fluid consistencies. Free of chlorides and aluminum powders, it is formulated for repairing or constructing high-strength concrete structures.

TDS

REC GROUT 735

REC GROUT 735 is a non-metallic, non-shrink, non-gas-forming grout blended from Portland cement, special admixtures, and proprietary aggregates, offering high flexural and compressive strength in both plastic and fluid consistencies. Free of chlorides and aluminum powders, it is formulated for repairing high-strength concrete.

TDS

REC GROUT 736

REC GROUT 736 is a non-metallic, non-shrink, non-gas-forming grout blended from Portland cement, special admixtures, and proprietary aggregates, offering high flexural and compressive strength in both plastic and fluid consistencies. Free of chlorides and aluminum powders, it is formulated for repairing high-strength concrete.

TDS

REC GROUT 737

REC GROUT 737 is a ready-to-use, cementitious, shrinkage-compensating grout made from selected aggregates, special cement, and additives, formulated for high compressive strength with excellent adhesion and resistance to shock and vibration.

TDS

REC GROUT 740

REC GROUT 740 is a ready-to-use sand-cement grout offering high early strength, pumpability, and strong resistance to vibration, shock, seawater, and sulfate water. It's used for grouting industrial equipment, anchoring fixings, precast assembly, shoring, concrete jacketing, void-filling, and sealing around pipes.

TDS

REC GROUT 741

REC GROUT 741 is a ready-to-use sand-cement grout with high early strength and strong resistance to vibration, shock, and seawater. Used for grouting equipment, anchoring, precast assembly, shoring, and void-filling.

TDS

REC GROUT 742

REC GROUT 742 is a ready-to-use, free-flowing cementitious grout requiring only water. It offers high strength, controlled expansion, and dynamic-load stability, making it ideal for grouting post-tensioning cables and anchoring systems while protecting steel from corrosion.

TDS

REC GROUT 743

REC GROUT 743 is a ready-to-use, free-flowing cementitious grout requiring only water. It offers high strength, controlled expansion, and dynamic-load stability, making it ideal for grouting post-tensioning cables and anchoring systems while protecting steel from corrosion.

TDS

REC GROUT 744

REC GROUT 744 is a ready-to-use, non-shrink cementitious grout offering high strength, low RCP, and controlled expansion with excellent dynamic-load stability. Ideal for post-tensioning and anchoring applications, it provides lasting corrosion protection for stressed steel cables and rods.

TDS

REC GROUT 745

REC GROUT 745 is a non-metallic, non-shrink, high-strength construction grout offering excellent flexural and compressive strength from plastic to fluid consistencies. Free of chlorides and aluminum powders, it's ideal for general-purpose precision grouting.

TDS

REC GROUT 746

REC GROUT 746 is a ready-to-use, free-flowing precision grout offering high strength, excellent flow, and volume stability. Chloride- and hydrogen-free, it resists chlorides, sulfates, and shock loads, and is ideal for void-filling, tie-rod hole filling, and concrete re-profiling.

TDS

REC GROUT 747

REC GROUT 747 is a ready-to-use, high-strength precision grout with excellent flow, volume stability, low permeability, and strong resistance to chlorides, sulfates, and shock loads. Ideal for anchoring, void-filling, base plates, and concrete re-profiling.

TDS

REC GROUT 748

REC GROUT 748 is a high-performance, non-shrink, non-metallic precision grout offering high flexural and compressive strength in plastic to fluid consistencies. Free of chlorides and aluminium powder, it resists seawater and sulfates, and is ideal for precast assembly, anchor and dowel grouting, machinery base plates, bridge keying, and void-filling.

TDS

REC GROUT 749

REC GROUT 749 is a ready-to-use, shrinkage-compensating micro-concrete made from selected sands, aggregates, special cement, and additives, offering high compressive strength and durability. It can be applied in layers from 50 mm to 300 mm up to 500 mm depending on design and reinforcement making it ideal for structural repair applications.

TDS

REC GROUT 750

REC GROUT 750 is a ready-to-use, shrinkage-compensating micro-concrete made from selected sands, aggregates, special cement, and additives, offering high compressive strength and durability. It can be applied in layers from 50 mm to 300 mm up to 500 mm depending on design and reinforcement making it ideal for structural repair applications.

TDS

REC GROUT 751

REC GROUT 751 is a three-component, high-flow epoxy grout made from resin, hardener, and specific fillers, offering excellent strength, waterproofing, and non-shrink performance. Its fluid consistency makes it ideal for grouting and bedding applications, with excellent resistance to shock, vibration, and dynamic loads.

TDS

REC GROUT 752

REC GROUT 752 is a ready-to-use grout made from sand, special cement, and additives, offering low shrinkage and no bleeding. It's ideal for grouting pipe supports, bedding heavy machinery and precast elements, formwork jointing, and void-filling applications.

TDS

REC GROUT 753

REC GROUT 753 is a ready-to-use, free-flowing precision grout offering zero shrinkage, no bleeding, and easy handling with high performance. It's ideal for concrete jacketing, void-filling, formwork and precast jointing, surface re-profiling, and bedding heavy machinery and equipment.

TDS

REC GROUT 754

REC GROUT 754 is a ready-to-use, free-flowing precision grout offering zero shrinkage, no bleeding, and easy handling with high performance. It's ideal for concrete jacketing, void-filling, formwork and precast jointing, surface re-profiling, and bedding heavy machinery and equipment.

TDS

REC GROUT 755

REC GROUT 755 is a ready-to-use, free-flowing precision grout offering zero shrinkage, no bleeding, and easy handling with high performance. It's ideal for concrete jacketing, void-filling, formwork and precast jointing, surface re-profiling, and bedding heavy machinery and equipment.

TDS

REC GROUT 756

REC GROUT 756 is a three-component, high-flow epoxy grout made from resin, hardener, and specific fillers, offering excellent strength, waterproofing, and non-shrink performance. Its fluid consistency makes it ideal for grouting and bedding applications, with excellent resistance to shock, vibration, and dynamic loads.

TDS

REC GROUT HR 723

REC GROUT HR 723 is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non-shrink grout for applications in high temperature zones.

TDS

REC INJECTION GROUT 710

Rec Injection Grout 710 is formulated to produce a pumpable, non-shrink, high strength grout. It provides unparalleled corrosion protection for steel cables, anchorages and rods.

TDS

REC POST MIX 300

REC POST MIX 300 is a rapid hardening 10mm concrete formulated for sub-surface use in the fast and efficient installation of posts, signs, fences, telephone and electricity poles, street lighting columns, street furniture, speed cameras and road side barriers.

TDS

REC POST MIX 301

REC POST MIX 301 is a concrete mix specially designed to fix posts very quickly and without prior mixing. It can be used to fix wooden or metal posts such as: fence posts, basketball posts, swing posts, mailbox posts, etc.

TDS

REC GROUT 718 NS

REC GROUT 719 NS is a high-strength pre-packed non-shrink cementitious pumpable grout consisting of Portland cement, selected graded silica sand, mineral accelerator, and other high performance additives.