Waterproofing
Epoxy Based
REC EPO COAT WB 7
REC EPO COAT WB 7 is a two-part, solvent free, non-toxic, epoxy resin based coating with outstanding mechanical properties. It is specially formulated to have excellent chemical and high abrasion resistance, as well as superb waterproofing features for concrete and metals surfaces.
TDS
REC EPO COAT WB 9
REC EPO COAT WB 9 is a 2 component, elastomeric epoxy polysulphide coating specially developed for its high crack bridging, to protect concrete and steel against a wide range of chemicals, fuels, oils, sea water and sewage.
TDS
Cement Based Waterproofing & Primers
REC PRIME 600
REC PRIME 600 is a deep penetrating primer for priming walls, floors, ceilings inside and outside buildings prior to fixing ceramic tiles, pouring floors, fixing floor lining, papering, puttying, painting, or fixing thermal insulation boards.
TDS
REC SEAL 101
REC SEAL 101 is a highly flexible polymer modified, hydraulic cement based, two-component system consisting of dry Component A (special cement+additives) and liquid Component B (acrylic copolymer+additives).
TDS
REC SEAL 102
REC SEAL 102 is a cement based two component polymer modified waterproofing slurry, available in grey and white. It is applied to concrete and mortar structures to prevent water infiltration.
TDS
REC SEAL 102
REC SEAL 102 is a cement based two component polymer modified waterproofing slurry, available in grey and white. It is applied to concrete and mortar structures to prevent water infiltration.
TDS
REC SEAL 103
REC SEAL 103 is a cement based two component polymer modified waterproofing slurry, available in grey and white. It is applied to concrete and mortar structures to prevent water infiltration. Protection and waterproofing of concrete surfaces.
TDS
REC SEAL 104
REC SEAL 104 is a polymer modified cement based waterproof coating for masonry and concrete, resistant to positive and negative water pressure.
TDS
REC SEAL 105
REC SEAL 105 is a two-component cement polymer modified elastomeric waterproofing coating used as a water-proof lining over masonry and concrete.
TDS
REC SEAL 106
REC SEAL 106 is fast-setting hydraulic cement that instantly and durably stops slight or serious water leaks.
TDS
REC SEAL 107
REC SEAL 107 is a two-component flexible cementitious coating used as a waterproof plaster or render over masonry and concrete.
TDS
REC SEAL 108
REC SEAL 108 is mono-component crystalline waterproofing product composed of special cement, proprietary blends of chemicals and sands that, when mixed with water and applied, penetrates into concrete and concrete unit masonry and reacts chemically with the by products of cement hydration in the presence of water to develop crystalline growth within substrate capillaries to produce an impervious, dense, waterproof substrate.
TDS
REC SEAL 109
REC SEAL 109 is specially formulated for use as a primer on gypsum boards prior to the application of a 2k cementitious waterproofing products to improve the adhesion.
TDS
REC SEAL 110
REC SEAL 110 is a two component polymer modified cementitious coating. Rec Seal 110 cures to form an elastomeric, waterproof, flexible and resistant membrane, suitable for use in potable water tanks, reservoirs, canals and tunnels.
TDS
Polyurethane Liquid Membranes
REC HYPER COAT PU-400
REC Hyper Coat PU-400 is a liquid applied, highly permanent elastic cold applied and cold curing, one component polyurethane membrane used for long-lasting waterproofing.
TDS
REC HYPER COAT PU-401
REC HyperCoatPU-401 is a liquid applied one component, water based modified polyurethane, when applied form a permanent elastic membranes used for coating of exterior surfaces.
TDS
REC HYPER COAT PU-402
REC HyperCoatPU-402 is liquid- applied polyurethane waterproofing membrane highly permanent elastic, cold applied and cold curing, one component polyurethane membrane used for long lasting waterproofing.
TDS
REC HYPER COAT PU-403
REC Hyper CoatPU-403 is a 1-component transparent low viscosity primer. It is mainly used as a primer for polyurethane waterproofing system.
TDS
REC HYPER COAT PU-404
REC Hyper CoatPU-404 is a liquid-applied, highly permanent elastic, cold applied and cold curing, bitumen extended, one component polyurethane membrane used for long lasting waterproofing.
TDS
REC HYPER COAT PU-405
REC Hyper Coat PU-405 is a liquid- applied, highly permanent elastic, cold applied and cold curing, bitumen extended, one component polyurethane membrane used for long lasting waterproofing.
TDS
REC HYPER COAT PU-406
REC Hyper CoatPU-406 is a pigmented, wear resistant, semi-rigid, color and UV-stable, weather-stable, cold applied and cold curing, one component aliphatic polyurethane coating used as a top-coat for protection over exposed waterproofing coatings, subject to high wear conditions.
TDS
REC HYPER COAT PU-407
REC Hyper Coat PU-407 is a 1-component liquid applied membrane made of polyurethane specially designed for waterproofing.
TDS
REC HYPER COAT PU-408
REC Hyper CoatPU-408 is a transparent, hard-elastic, one component aliphatic polyurethane, high-solids coating, used for long-lasting waterproofing.
TDS
Polyurethane Injections
REC PU INJECTION 008
REC PU INJECTION 008 is a hydrophobic polyurethane grout packaged in a convenient single cartridge.
TDS
REC PU INJECTION 009
REC PU INJECTION 009 is a hydrophobic polyurethane compound that is injected in concrete and other sound substrates to stop water from entering into occupied or unwanted places.
TDS
REC INJECTION PU 0010
REC INJECTION PU 0010 is a two components flexible polyurethane injection resin with very low viscosity. It reacts in wet or dry crack sand joints.
TDS
REC INJECTION PU 0020
REC INJECTION PU 0020 is a low viscosity MDI-based water reactive polyurethane injection, composed of a resin component and a catalyst.
TDS
Polyurea Membranes
REC POLYUREA 515
REC POLYUREA 515 is a spray-applied, 100% solids, flexible, two-component, rapid curing pure Polyurea system, designed as a waterproofing and protective coating.
TDS
REC POLYUREA 550
REC Polyurea 550 is a two component, fast setting, solvent free hybrid polyurea membrane applied by high-pressure bi-mixer type heated pumps.
TDS
Bitumen
REC ASPHALT FIX 980
REC ASPHALT FIX 980 is a new product that has all the properties of the traditional hot asphalt, with the additional advantage of not requiring heating for application work.
TDS
REC ASPHALT TOPPING 009
This specification details REC ASPHALT TOPPING 009 asphalt, heavy duty traffic topping for use on truck loading docks, exterior ramps and selected exposed roof parking decks conforming to CGSB 37-65-M88.
TDS
REC BITUMASTIC SEALANT
REC BITUMASTIC SEALANT is a single component, solvent based bitumen rubber mastic joint sealant, the sealant on curing forms a tough and flexible seal.
TDS
REC BITUMEN COAT 00097S
Solvent-based bituminous coating for permanent protection of concrete surfaces subject to aggressive soils.
TDS
Rec Bitumen Impregnated Boards
A preformed expansion joint filler board for joint in all concrete structures and brick structures.
TDS
REC BLACKTOP REPAIR
REC BLACKTOP REPAIR is a revolutionary, high performance, flexible, reactive cold mix asphalt repair product for use in repairing asphalt and concrete road surfaces.
TDS
REC GRIP 4000
REC GRIP 4000 is a bituminous antiriot waterproofing membrane manufactured by blending a mixture of bitumen and SBS (Styrene Butadiene Styrene) polymers to obtain excellent waterproofing and low temperature flexibility properties.
TDS
REC HP-5000
REC HP-5000 is a torch-bonding, 2,3,4 and 5 mm thick, heavy duty waterproofing sheet membrane that consists of an extremely robust non-woven polyester reinforcement, coated on both sides with modified bitumen compound.
TDS
REC TACK COAT
REC TACK COAT is an anionic slow setting asphalt emulsion which serves as a tack coat for better coating adhesion on asphalt pavement surfaces.
TDS
REC PRIME COAT
REC PRIME COAT is a cationic bitumen emulsion; it is supplied as brown liquid, and available in two grades, Rapid Set and Medium Set.
TDS
Bituminous Liquid Membranes
REC EMULSION CAP 75
Rec Emulsion CAP 75 is a non fibrated bitumen emulsion coating of brushing consistency which dries to give a firm, flexible, jointless waterproof and protective membrane.
TDS
REC EMULSION CAP 76
Rec Emulsion CAP 76 is a thixotropic bitumen emulsion designed for application as a primer and sealer coat.
TDS
REC EMULSION CAP 77
Rec Emulsion CAP 77 is a single component, cold applied highly stable fibrated solvent base bitumen. It contains mineral stabilizers, special adhesion additives, and reinforcing fibers.
TDS
REC EMULSION CAP 78
Rec Emulsion CAP 78 is solvent- based primer, used for the preparation of surface to be waterproofed, with the aim of improving adherence of the waterproofing bituminous membranes to the substrate.
TDS
REC EMULSION CAP 79
Rec Emulsion CAP 79 is a cold applied highly stable bitumen emulsion compound. It contains a high proportion of stabilizers and thickeners to ensure a prolonged shelf life and easy usage.
TDS
REC EMULSION CAP 80
Rec Emulsion CAP 80 is a rubberized bitumen emulsion with excellent adhesion to most building substrates. It dries to form a black flexible coating.
TDS
REC EMULSION CAP 81
REC EMULSION CAP 81 is a ready to use cold applied single component, high build rubber modified bitumen emulsion which cures to provide a seamless tough durable and elastic coating for use in waterproofing and damp proofing work.
TDS
REC EMULSION CAP 82
REC EMULSION CAP 82 is a flexible rubberized bitumen emulsion with excellent adhesion to most building substrates due to its high rubber content.
TDS
REC EMULSION CAP 83
REC EMULSION CAP 83 is a water base cold applied rubberized bituminous emulsion resilient and extremely elastic coating. It has an excellent adhesion to most surfaces (concrete, masonry, asphalt, hardwoods, brickwork and metal …).
TDS
REC EMULSION CAP 84
REC EMULSION CAP 84 is a ready to use cold applied bitumen emulsion modified with SBR (Styrene Butadiene Rubber), to provide a tough durable and elastic coating. The cured film is weatherproof and resistant to aggressive ground salts.
TDS
REC EMULSION CAP 85
REC EMULSION CAP 85 is a cold-applied rubberized bitumen emulsion with polymer and mineral fillers. Rec Emulsion CAP 85 Once applied, it forms an elastomeric damp proof membrane.
TDS
REC EMULSION CAP 86
REC EMULSION CAP 86 is a high quality, solvent-based bitumen paint giving a black flexible waterproof coating when dry.
TDS
REC EMULSION CAP 87
REC EMULSION CAP 87 is water base cold applied stable bitumen emulsion that dries to give a flexible, joint less, waterproof coating.
TDS
REC EMULSION 75
Rec Emulsion 75 is water base cold applied stable bitumen emulsion that dries to give a flexible, joint less, waterproof coating.
TDS